Normal Force in Sliding Friction
About 3 min read
The normal force in sliding friction is the perpendicular force pushing the object to the surface on which it is sliding. It is an essential part of the standard sliding friction equation.
That force can be due to the weight of an object or that caused by an external push.
When the weight is on an incline, the normal force is reduced by the cosine of the incline angle.
Questions you may have include:
- What is the standard friction equation?
- When it weight the normal force?
- What are examples of external normal force?
This lesson will answer those questions. Useful tool: Units Conversion
Standard sliding friction equation
The normal force is seen in the standard sliding friction equation:
Fs = μsN
or
N = Fs/μs
where:
- N is the normal or perpendicular force pushing the two objects together
- Fs is the sliding force of friction
- μs is the sliding coefficient of friction for the two surfaces (Greek letter “mu”)
(See Standard Friction Equation for details.)
Static and kinetic coefficients
The sliding coefficient of friction can be static when the object is stationary or kinetic when the object is sliding over the other surface.
The coefficient of sliding friction in the static mode of motion (μss) is greater that the coefficient in the kinetic or moving mode (μks).
μss > μks
(See Coefficient of Sliding Friction for more information.)
Weight as normal force
The normal force N can be the weight of an object as caused by gravity. This would apply in situations where you slide a heavy object across the floor or some horizontal surface.
Since weight is the force pushing the objects together, the friction equation becomes:
Fs = μsW
where W is the weight of the object.
For example:
Thus if a box weighs 100 pounds and the coefficient of friction between it and the ground is 0.7, then the force required to push the box along the floor is 70 pounds.
Likewise if a box weighs 500 newtons is placed on ice with a coefficient of friction of only 0.001, then it would only take 0.5 newtons to move the box.
Weight on incline
If the weight is on an incline, the normal force will be reduced by the cosine of the incline angle. The equation is
N = W*cos(β)
where:
- N is the normal force on the incline
- W is the weight
- β is the incline angle (Greek letter beta)
- cos(β) is the cosine of the angle β
- W*cos(β) is W times cos(β)
Thus, the friction equation is:
Fs = μW*cos(β)
An illustration of the friction on a box on an incline is:
(See Sliding Friction on an Inclined Surface for more information)
External normal force
Examples of external normal forces include pushing a sanding block on an object and a pair of pliers.
Pushing object sideways
If you push a sanding block against a wooden desk you were sanding, the normal force would be the amount of force you pushed on the block. You would move the sanding block in one direction and the force of friction would be in the opposite direction.
Two normal forces
Sometimes, two normal forces are used to cause the friction.
One example is a pair of pliers that applies a normal force on both sides of a piece of wood that the pair of pliers is holding. Another example are the calipers on automobile disc brakes that apply a force on both sides of the metal disc to slow down the car.
Summary
The normal force in the standard friction equation is the force pushing the two objects together, perpendicular to their surfaces. That force can be due to the weight of an object or that caused by an external push. When the weight is on an incline, the normal force is reduced by the cosine of the incline angle.
It all makes sense
Resources and references
Websites
Friction Resources – Extensive list
Friction Concepts – HyperPhysics